Prefabricated Modular Control Rooms

Industrial Modular Control Room Manufacturer

As a leading industrial modular control room manufacturer, CID Building builds, designs and manufactures liftable multi-story prefabricated buildings, modular control rooms, offices, and computer centers which save valuable mill floor space. Each prefabricated modular control room incorporates heavy-duty, continuous welded steel skeleton of 1/4" tubular steel with the protected crown framework including lifting lugs for setting and relocating these liftable buildings. The typical application utilizes the top floor for an observatory control pulpit and the bottom floor for a lunchroom, motor control center, or just for storage. Contact us today to learn more about our prefabricated modular control rooms. 

Prefabricated Modular Control Rooms

Custom Features 

  • Stairs
  • Catwalks
  • Landings
  • Handrail

Industrial Modular Control Room Manufacturer 

Industrial Modular Control Room Manufacturer    Prefabricated Modular Control Rooms

Areas We Work In:

Alabama, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Mexico, Michigan, Mississippi, Missouri, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Vermont, Virginia, West Virginia, Wisconsin, Canada, Mexico, and other worldwide installations.

Technical Drawings

319720319720

Specifications

•PHASE #1: Basic Structure - Single Module Overall Outside Dimension

•PHASE #2: Load Bearing Roof Deck

•PHASE #3: Floor Framing, Finished Floor, Doors, Frames & Acoustics

•PHASE #4: Painting

•PHASE #5: Electrical Package

 

#1 BASIC STRUCTURE – SINGLE MODULE CONTROL PULPIT

•The enclosure to be constructed in unitized form and shall be fully welded, utilizing tubular steel products.

•Unit will have crane lifting lugs fully welded at reinforced vertical members.

•The door openings to have a vertical subframe of 4" tubular steel to prevent deflection, displacement, and twisting of the steel doors and frames.

•Wall system to be utilized within the 4" tubular steel panel superstructure to be CID wall panel.

•Exterior wall panels to be carbon steel plate with continuous weld seams and VOC compliant alkyd industrial enamel finish.

•The 4" wall system to incorporate mineral fiber acoustical insulating blanket.

•This insulation will serve as a thermal barrier, dust barrier, and sound deadener.

•The interior porcelain enamel finish steel hard wall panels are extremely rugged, nonchalking, corrosion resistant, and maintenance free.

 

#2 LOAD BEARING ROOF

•The unitized tubular steel framework is designed for and will accommodate recessed structural steel channels inside the lifting crown framework.

•A 10 gauge carbon steel load bearing roof shall be placed and fully seam welded (continuous) at panel junctures and at the structure periphery.

•The completed roof material system shall be fully load bearing to meet owner specification.

•The completed roof system is weather and water tight.

 

#3 FLOOR FRAMING, FINISHED FLOOR, DOORS, FRAMES, & ACOUSTICS

•Floor framing materials to consist of tubular steel perimeter base members and structural steel C-channels, located to support exterior undercover as well as the finished floor system.

•Steel C-channels are to be welded to the unit superstructure tubular steel base.

•Finished subfloor of the structure to be steel plate.

•Area between the interior and exterior floors to have mineral fiber insulating material, securely fastened to the understructure of the finished floor system.

•The fire resistant, mildew proof insulation is inert and will provide both sound and thermal protections.

•Exterior doors to be supplied with the enclosure at the entry locations.

 

#4 PAINTING

•All surfaces receiving coating shall be properly prepared as per paint manufacturer's specifications prior to the application of the first prime coat.

•Paint color selection and accents to be as selected by the owner. Corporate colors and company logos may be provided at no additional charge.

 

#5 ELECTRICAL PACKAGE

•The CID state of the art liftable building shall be furnished with an integral electrical wiring system, including one 12 circuit, 125 amp rated distribution panel.

•The load center to accommodate duplex wall receptacles with GFI protection where required.

•Surface mount 2' x 4' fluorescent light fixtures will be provided.

•All wiring is to be installed as per NEC code and to be installed with recessed EMT metal conduit.

•Independent electrical inspection certificate may be provided if requested.

•Ceiling mounted dual head emergency light unit is included with lighted exit sign at the door(s).

 

ADDITIONAL OPTIONS INCLUDE:

•Walkways, stairs, platforms with support structures for elevated installation, and HVAC equipment.

 

To access a complete specification package please contact CID Buildings and ask to speak with someone in sales.

PDF Downloads

  • Let CID Make Your Decisions Easy — Download